Overview

This series of boilers mainly use condensing technology to recover the residual heat of flue gas, making full use of the sensible heat and latent heat of flue gas. The boiler absorbs a large amount of heat again, so the exhaust gas temperature is only 50 °C, and the thermal efficiency can be increased by more than 10%, which can save at least 4% of fuel input.

Specs

  • Rated thermal power: 0.7-14Mw
  • Rated thermal efficiency: 96-98%
  • Pressure: ≤1.25MPa
  • Available fuel: light oil, etc.

Gas(oil) Fired Integrated Hot Water Boiler

Types Thermal power Steam pressure Thermal efficiency Fuel Power requirement Length * Width * Height Weight Chimney
Unit Mw MPa % V/Hz mm t mm
CWNSL0.7-95/70-Y.Q 0.7 ≤1.25 96-98 Light oil,
natural gas
380/50 3730 * 1950 * 2430 3.43 300
CWNSL1.4-95/70-Y.Q 1.4 3710 * 2270 * 2850 4.55 350
CWNSL2.1-95/70-Y.Q 2.1 4440 * 2360 * 3220 6.18 450
CWNSL2.8-95/70-Y.Q 2.8 5170 * 2520 * 3310 6.33 450
WNS2.8-1.0-115(95)/70-Y.Q 2.8 5500 * 3260 * 3680 8.15 450
WNS4.2-1.0-115(95)/70-Y.Q 4.2 6500 * 3530 * 4320 13.94 550
WNS5.6-1.0-115(95)/70-Y.Q 5.6 7090 * 4030 * 4990 17.99 700
WNS7-1.0-115(95)/70-Y.Q 7 7650 * 4040 * 5090 20.43 700
WNS14-1.25-115(95)/70-Y.Q 14 9280 * 4350 * 5770 40.46 900

CONTACT & BOILER INFORMATION

NAME

EMAIL*

PHONE

PRODUCTS*

FUEL*

CAPACITY NEEDED

PRODUCTS DESCRIPTION