1. Model difference:
The model of the 10-ton gas-fired steam boiler is: WNS10-1.25-Y(Q), that is, the rated evaporation capacity of the horizontal internal combustion chamber combustion boiler is 10t/h, the rated steam pressure is 1.25 (MPa), and the rated steam temperature is 194 (degrees) ), the design fuel is natural gas.
10-ton gas-fired hot water boiler model: WNS7-1.0/95/70-Y(Q), where 7 represents rated heating power 7 (MW), rated outlet pressure 1 (MPa), outlet temperature 95 (degrees), return water temperature 70 (degrees), the design fuel is natural gas.
2. Scope of application:
The 10-ton gas-fired steam boiler is mainly used to generate steam, with a steam output of 10 tons per hour. It is mainly used in water washing plants, chemical plants, food plants, plastic plants, tire plants, paper mills, breweries, materials plants, fertilizer plants, etc. .
The 10-ton gas-fired hot water boiler is mainly used for central heating. If it is a standard district heating, it can heat about 80,000 square meters. If it is heating in factories, supermarkets, and shopping malls, it can heat up about 60,000 square meters.
3. Performance advantages:
When a 10-ton gas-fired steam boiler produces 1 ton of steam, the cost of the gas-fired boiler is 240 yuan/ton, and the service life is relatively long. Since gas-fired steam boilers use clean fuels, they will not produce smoke and dust in the furnace during combustion, so they have a longer service life than other types of boilers.
A 10-ton gas-fired hot water boiler consumes about 787.5 cubic meters of standard natural gas per hour, but the gas-fired hot water boiler of Zhengguo Group is equipped with a flue gas condensing economizer, which increases the temperature of the supplementary water tank, thereby achieving an energy-saving effect of 10%. The hourly gas consumption of a ton gas hot water boiler is 681.75 cubic meters.
