The price of a 6-ton boiler will be explained to you, the innovation of condensing boilers over traditional boilers, and a comprehensive comparative analysis will be made for everyone.
Check whether they have been adjusted to the specified opening pressure; whether the installation of the drain pipe is reasonable; check whether the drain pipe is blocked; whether there are anti-stale measures.
In the external heat exchanger, superheater, reheater or evaporative heating surface can be arranged, which is not enough for the development of high-parameter and large-capacity circulating fluidized bed power station. difficulties are significant. In addition to being convenient for adjusting the load or adjusting the furnace temperature, the external heat exchanger does not need to change the cycle rate and other factors, but also has the advantage of expanding the scope of the boiler's fuel adaptation. In addition, if a superheater or reheater heating surface is arranged therein, the steam temperature adjustment can be made simple.
With the development of society and the advancement of science and technology, people have put forward higher requirements for the intelligence of the heating pipe network. In addition, in recent years, the state has encouraged combined heat and power central heating, in order to completely solve the serious pollution of small 6-ton boilers. It is necessary to develop green, intelligent, safe and efficient central heating technology. This paper introduces the status quo of industrial central heating in China, strengthens the monitoring of key links in industrial heating through the application of smart heating system technology, and strengthens the performance of various subsystems. Information exchange, build an information-based heating management and control platform, and provide a reference for the upgrading of industrial central heating.
What is the price of a 6-ton boiler? Some terminology explanations and their problem handling: For the boiler, are there any other common questions and difficult problems besides the ones already mentioned above? Why this question is raised, its purpose is only one, that is, to introduce the content of the article, let everyone know which aspect of learning will be carried out, so as to prepare, in order to improve their learning efficiency. 1. What are the general types of boiler inspections? For its deaerator, which is the main one? In boiler inspection, there are generally three external inspections, internal inspections and hydraulic tests. Among them, the external inspection is carried out once a year, and the internal inspection is carried out every two years. The hydrostatic test is carried out every six years. In addition, there are two types of deaerators: headed and headless, but in boilers, headed deaerators are mainly used. 2. What are the components of chain boilers? For the water in the boiler, if its alkalinity is too high, what should be done? In terms of structure, the chain boiler mainly includes the boiler body and auxiliary equipment. If the boiler water has the problem of excessive alkalinity, the specific solution is as follows: Method 1, strengthen the sewage discharge of the boiler, generally for the surface sewage. The second method is to add alkali reducing agents, such as disodium hydrogen phosphate, sodium dihydrogen phosphate, etc., to the boiler water, but it should be noted that acid must not be added, because this will bring adverse consequences.
