Both industrial boilers and power station boilers belong to a large category of boilers, but we can find that the user groups for these two types of boilers are different from the names. Many users are vague about the concepts and differences between these two types of boilers. Zhengzhou Fangkuai boiler manufacturers will explain the main differences between these two types of boilers to help you judge and choose the appropriate boiler model.
The most important difference between industrial boilers and power station boilers is the size and parameters.
Power plant boilers are also called power plant boilers, and most of them have an evaporation capacity of 220 tons/hour or more and parameters of 540°C and 10 MPa or more. For example, the boiler of the 300,000 subcritical unit is 1025 tons/hour, the temperature is 540°C and the pressure is 17.6 MPa.
Compared with power station boilers, the tonnage of industrial boilers is relatively small, ranging from a few tons to several hundred tons, the temperature is 200-300 ℃, and the pressure is about 0.6-1.6 MPa.
At present, most industrial users still have a high probability of using industrial boilers.
Industrial boilers on the market have a variety of classification methods according to differences in media, structure, pressure, applicable fuel and other aspects.
According to the medium, it is divided into steam, soda and water, and heat medium furnace; according to the pressure, it is divided into low, medium, high pressure and ultra-high pressure. Subcritical, supercritical and ultra-supercritical are divided into chain furnaces, fixed grate (hand-fired furnaces), chamber-fired furnaces (gas fuel oil, pulverized coal, boiling furnaces, semi-boiling furnaces, circulating fluidized bed boilers) according to the layout of the combustion chambers. etc.); according to the medium circulation mode, there are natural circulation and forced circulation, high and low rate circulation boilers, once-through boilers, etc.; according to the output, there are three types of small, medium and large; according to the installation method, there are quick installation (complete installation), assembly and bulk boilers ; According to the installation location, there are indoor, outdoor and flow boilers, and according to the type of fuel, there are coal, gas, oil, oil and gas dual-use, coal gangue, firewood, bagasse, garbage, nuclear energy, etc. There are many ways to classify .
